Ricoh Pro C9500 Operator's Manual page 132

3. Paper Settings
• When the number of registered custom papers reaches the maximum, you will not be able to
register a new custom paper. Delete any unnecessary custom papers from the list, and then try
registering again. For details, see page 146 "Deleting a Custom Paper".
• In "ID", an available number in ascending order starting with "1" is assigned. You can change the
number on the "Advanced Settings" screen.
Selecting the Paper's Name from the Master Library
1. Press the [Media] hub
2. Select the check box of the paper to register, and then press [Copy].
You can specify more than one paper together at a time.
3. Press [OK].
The paper is registered as a "Custom Paper".
Registering a Paper Whose Paper Name Is Not Displayed in the Master Library
If the paper you want is not in the library's paper list or you don't know the name of the paper, use the
following procedures:
• Selecting the paper's type from the master library
The master library contains the optimum printing conditions not only for each commercially
available paper but also for each type of paper.
You can select the type of paper from the master library and register it as a custom paper even if
you don't know the name of the paper. The selectable paper types are as follows: Plain Paper,
130
[Master Library].
M0EDPM7241
M0EDPM7261