Table of Contents
Advertisement
4. Fax
3.
Make sure [Immed. TX] is not highlighted.
4.
Place the original into the ADF.
5.
Make the scan settings such as scan size and resolution.
6.
Configure the transmission settings such as [TX Mode] as necessary.
7.
Specify a destination.
You can enter the destination's number or address directly or select from the Address Book by
pressing the destination key.
If you make a mistake, press the [Clear] key, and then enter again.
8.
When sending the same original to several destinations (broadcasting), specify the next
destination.
108
Advertisement
Table of Contents
