Specifications - Honeywell Midas S2 User Manual

6.4 Specifications

Transmitter Dimension
Size (unit with Cartridge)
Weight - Transmitter
Weight - Sensor cartridge
Power Requirements
Operating Voltage
Operating Voltage with Power over Ethernet (PoE) 48 VDC PoE (IEEE 802.3af compliant)
Power Consumption
Transmitter unit
Transmitter unit with optional module
Outputs
Visuals
Relays
Analog
Digital Communications
Display
Size/color
Viewing angle
Operation key
Transport System
Flow Rate
Sample Line Tubing
Sample line Length
Exhaust Line Tubing
Exhaust Length
Ambient Point
Environmental
Operating temperature
Condition
Overvoltage
Pollution degree
Midas S2
138.6 (H) x 55 (W) x 148 (D) mm (5.46 x 2.17 x 5.83 in)
1.03kg (2.27lb)
34~73 g (0.075~0.161 lb) dependent on sensor type
24 VDC Nominal, -15 to +10% (20.4 to 26.4 VDC)
Toxic <4W, LEL <5.5W
NDIR <4.5W, Pyrolyzer < 12.95W
Power, Alarm, Fault LEDs and color TFT LCD
Alarm1, Alarm2, Fault relay rated 1.0A@30VDC or 0.5A@125VAC max
Sink/Source, 4-20mA
Modbus/TCP Ethernet/Power over Ethernet (PoE)
2.4inch IPS panel with 16.7M display color
160 or higher degree viewing angle
4-button interface keypad
Typically 500 mL/min
3.18mm ID X 6.35mm OD (0.125 X 0.25in)
Up to 30 m (100 ft) with FEP tubing
4.76 mm ID X 6.35 mm OD (0.188 X 0.25 in)
Up to 30 m (100 ft)
In line air filter required
0°C to +40°C (32°F to 104°F)
0°C to +30°C (32°F to 86°F) with Pyrolyzer
Indoor only
Category 1
2
48 User Manual