Configure Device With Dd (Device Description) - Honeywell SmartLine SLN700 User Manual

Configure Device with DD (Device Description)


Once the HART device is loaded under the network, user must configure the device with DD.
Perform below steps to configure a device with DD:
1. Right-click the required device tag under Online View.
2. Click Configure with and select DD from the list. The device is loaded using the DD
settings.
Note: A user can also open the device configuration page by double-clicking the device in
the Network list under Online View.
Page 8
Figure 6: Configure device with DD

SLN700 Series HART Option User's Manual Revision 1