Table of Contents
Advertisement
SC-P5300 Series
User's Guide
Setting item
Custom Paper Setting (Settings that are registered in Epson Media Installer cannot be changed)
01 to 30
Change Name
Change Reference Paper
Advanced Paper Settings
Paper Thickness
Platen Gap
Top Margin
Bottom Margin
Paper Suction
Roll Paper
Cut Sheet, Poster
Board, Paper Cassette
Back Tension
Drying Time
Menu List
Set value
0.4 to 59.1 mil
*
Auto
, 0.9 mm, 1.2 mm, 1.5
mm, 2.1 mm, 2.6 mm
3 mm, 15 mm, 20 mm, 35
mm
*
3 mm, 15 mm
*
-4 to 4 (0
)
*
-4 to 4 (0
)
Standard, High, Extra High
Drying Time per Pass, Drying
Time per Page
115
Explanation
Displays the registered number and registered
name.
Select a number for changing setting
registrations and setting contents.
Paper setting information that has been
registered using the driver or other software
cannot be changed by the printer.
Enter the name of the paper setting to be
registered. Select this name for Paper Type.
Provide a name that is easy to identify.
Displays the reference paper type.
This is displayed when Custom Paper is selected
in Paper Type. Set the paper thickness within
the range that can be used by the printer. See
the following for paper thicknesses that can be
used.
"Supported Commercially Available Paper"
U
on page 154
Can be adjusted in 0.01 mm (0.1 mil) increments.
Select a larger value (wider setting) if print
results are scratched or smudged.
If uneven color occurs at the top edge of the
paper, print a larger top margin.
Set to 15 mm if there are roller marks or
smudges on the bottom edge of the paper.
Thin or soft paper may not be fed correctly. If this
occurs, reduce the setting.
Adjust this when paper gets wrinkled during
printing.
You can set the drying time for each print head
movement (pass) or the drying time for each
page.
Advertisement
Table of Contents
