Table of Contents
Advertisement
SC-P5300 Series
User's Guide
Cleaning the roll paper feeder
A cloth is attached to the roll paper feed slot, to catch
paper particles and dust that are adhered to the paper
surface and edges.
Use the specialized cleaning sheet in the following
procedure to remove dust caught by the cloth in the
roll paper feed slot. Always use a new cleaning sheet.
Purchase a cleaning sheet, sold separately, when the
supplied cleaning sheet has been used.
"Options and Consumable Products" on page 147
U
c
Important:
Clean the roll paper feed slot using a cleaning sheet
approximately once a year.
A
Turn on the printer by pressing the P button.
B
Check that Load paper. is displayed on the
screen, and then press
A screen appears to guide you through loading
the roll paper, but do not operate the screen.
C
Open the roll paper cover.
Maintenance
.
129
Note:
Close this while the paper support is open.
D
Remove the protective sheet that is on the
cleaning sheet.
The gray area indicated by A is the adhesive
surface. Do not touch it with your hands or
anything else.
E
Insert the cleaning sheet until it reaches the end
of the roll paper feed slot, and then pull it out.
Repeat this two or three times.
To clean the roll paper feed slot from end to
end, do it several times on the right side, center,
and left side sections.
Advertisement
Table of Contents
