Epson SC-P5300 Series User Manual page 146

SC-P5300 Series User's Guide
The administrator password has
been lost
Should you forget the administrator password,
o
contact your dealer or Epson Support.
Head cleaning is performed
automatically
The printer may automatically perform head
o
cleaning to ensure print quality.
Cannot update the firmware for the
printer
Are there any jobs in progress or
o
outstanding jobs on the printer?
Wait for the jobs to finish being processed or cancel
the jobs.
Printing stops when printing in a
VPN (Virtual Private Network)
environment
Try setting the network setting to
o
100Base-TX Auto.
You can set this from Settings - General Settings -
Network Settings - Quality Options on the control
panel.
You can also change network settings in Web Config
or Epson Device Admin.
The printer turned off due to a
power cut
Turn off the printer, and then turn it back
o
on.
When the printer is not turned off normally, the
print head may not be capped correctly. If the print
head is left uncapped for a long time, the print
quality may decline.
When you turn on the printer, capping is performed
automatically after a few minutes.
Also, if the printer is turned off during calibration,
data transmission and writing adjustment values
may not be performed correctly. When the date is
initialized, the adjustment values are also initialized.
Problem Solver
146