Table of Contents
Advertisement
SC-P5300 Series
User's Guide
B
Select the paper information you want to edit,
and then click
(Copy Media).
You can only copy paper information that has
Registered displayed as the Status in the
list.
A copy of the paper information is created. The
copy has the word "(Copy)" displayed at the end
of the media name.
C
Select the paper information you copied, and
then click
(Edit).
The Edit Media Settings screen is displayed.
D
Change the settings according to your printing
needs and so on, and then click OK.
See the following for more details on the Edit
Media Settings screen.
"Edit Media Settings Screen
U
Configuration" on page 28
E
The edited paper information is reflected in the
printer driver.
Basic Operations
Make custom paper settings on the
control panel
A
Select General Settings - Printer Settings -
Custom Paper Setting on the control panel.
B
Select a paper number from 1 to 30 to save the
settings.
C
Set the paper information.
Make sure you set the following items.
❏ Change Reference Paper
❏ Paper Thickness
❏ Roll Core Diameter (roll paper only)
❏ Paper Feed Offset
Note:
Paper Feed Offset is a function that allows you to
adjust the difference between the data size and the
print size.
Example:
When printing at a data size of 100 mm and a
print size of 101 mm, the offset is 1.0 %.
Therefore, you would enter a value of -1.0 %.
See the following for details on the other
settings.
"General Settings" on page 111
U
c
Important:
When printing from the printer driver using
the paper set in Custom Paper Setting on the
control panel, the Media Type in the printer
driver needs to match the paper type selected
in Change Reference Paper in Custom Paper
Setting on the control panel.
47
Advertisement
Table of Contents
