Advertisement
INPUT-3
ComponentVideo
connection
compatibility
This input is compatible with component
video signals from standard DVD players and other
equipment that send standard NTSC component
video, also known as 480L This input may also be
compatible with some newer DVD players, that are described as 480p or progressive scan. Since
the industry standard concerning copy protection
for 480p DVD signals was not finalized when this
TV design was completed, you may experience a small amount of picture disturbance near the top
edge when playing discs using the 480p outputs of some DVD players.
HIGH
Input levels and timing
with component
video
Y
= 1.0V p-p (includes sync) 75 ohms
Cr = 700m Vp-p,75 ohms (can also recieve signalsfrom outputs labeled R-Y and Pr).
Cb = 700m Vp-p, 75 ohms (can also receive signalsfrom outputs labeled B-Y and Pb).
DEFINITION
INTERFACE
HDTVVideo
connection
compatibility
This input is fully compatible with the Mitsubishi HD-1080 HDTV receiver. You will need BNC-to-
RCA adaptors for the RGB with H andV cable connections to the TV. Adaptors are available at
most electronic and computer
supply stores.
For other HDTV receivers, this input is compatible with most standard HDTV receivers that have
component
video outputs.
Compatible
DTV signals are SDTV 480i or 480p and HDTV
1080i. All
other digital TV signals, such as 720p, need to be converted
by the HDTV receiver to any of the
above signals. Please check the HDTV receiver specifications before connecting.
This input is also compatible with HDTV receivers using RGB with "sync on green" or RGB with
"separate H and V sync". Compatible DTV signals are SDTV 480i, 480p or H DTV 1080i. All other
digital TV signals, such as 720p, need to be converted
by the HDTV receiver to one of the compat-
ible signals. Industry standards for DTV RGB signals systems, synchronization
and signal strengths
are not currently established. These inputs will not be compatible with all HDTV receivers that
offer RGB. If your HDTV receiver offers both HDTV component video signals and HDTV RGB
signals, Mitsubishi suggests you use the HDTV component
video signals. Please check the HDTV
receiver specifications before connecting.
Input levels and timing
when used with HD component
video signals
EIA - 770.3 standard levels and timing
Y
= 1.0Vp-p (includes sync), 75 ohms
Pr = 700mVp-p, 75 ohms
Pb = 700mVp-p,75
ohms
H
= not used
V
= not used
Input levels and timing when used with RGB
G (Y) = 1.0Vp-p 75 ohms (compatible with sync on green)
R (Pr) = 700mVp-p, 75 ohms
B (Pb) = 700mVp-p, 75 ohms
H
= 3Vp-p + 1.0v,75 ohms (when using separate H andV sync)
V
= 3 Vp-p + 1.0v, 75 ohms (when using separate H and V sync)
83
Advertisement
