Advertisement
Connection
of TV to AV Receiver
I, Connect a video cable fromVIDEO,
MONITOR
OUT on the back of the AV
Receiver toVIDEO,
INPUT-I on theTV
back panel using aVIDEO cable,
2, Connect a video cable fromVIDEO,
MONITOR
OUTPUT on the TV back
panel to VIDEO TV IN on the back of the
AV Receiver,
3, Connect a set of audio cables from AUDIO,
MONITOR
OUTPUT on the TV back panel
toAUDIOTV
IN on the back of the AV
Receiver, The red cable connects to the R
(right) channel and the white cable con-
nects to the L (left) channel,
Connection of TV to a Mitsubishi AV Receiver Infrared
Emitter (IR) for Home Theater Control
I, Connect the IR emitter cable to IR HOME
THEATER on the back of the television,
2, Place the IR emitter cable under or along side
of theAV receiver, Place the IR lens directly
in front of the infrared location of the AV
receiver, Infrared locations are usually on the
front glass section of the receiver,
3, Place the unused transmitter
in an out-of-the-
way location,
4, For permanent installation of the IR emitter
cable, use the included adhesive tape to
secure the bottom of the emitter to the
anchoring object you choose,
IMPORTANT
I
See pages 67-68 for details on using I
the TV s IR emitter
to control a
M tsub sh AV rece vet.
I
TV back panel
Mitsubishi
AV Receiver
13
Advertisement
