Mitsubishi VS-50805 Owner's Manual page 23

Remote Control Channel Selection
There are several ways to select channels with the remote control:
Changing Channels
Numbers*
enter the number, the
channel w ill change _
in 4 seconds, o r
after the third number
SQV (SuperQuickView_
press to see stored
SQV channels,in order
Channel
press to view channe
order, including DTV
channels (when optional
HD-1080 receiver is
connected)
OQO
_QQ_
, ir
I
SUB
When optional HD- 1080
i_eceiver is connected, use
after choosing a major DTV
channel, t o enter minor (sub)
channel
QV (QuickView
TM)
press QVtosee the last
channelselected
GUIDE
Displays DTV Channel Guide
(when optional HD-I080
receiver is connected)
* Using the Number buttons:
For non-DTV channels:
When changing channels directly, you can change them faster by:
I. entering three numbers; for channel 2, press 002
OR
ENTER
2. press number and ENTER; for channel 2, press 2 then _.
For DTV channels when an optional HD- 1080 receiver is con-
nected:
I. Use the number buttons to select the one or two digit major channel.
SUB
2. Press _.
3. Use the number buttons to select the one or two digit minor channel
(if available).
Two asterisks will display if no minor channel exists: 17.**
Two question marks will display while TV is looking for minor channel: 12.??
23