Advertisement
Back Panel Functions, continued
INPUT-I
and 2 S-Video,
Video
@®
The S-video terminals connect to a S-video signal from a SuperVHS
(S-VHS)VCR, laser disc player or other audio video device to the TV.
If you connect an input to S-Video, you cannot connect to standard
video. For standard video, connect the video output from a standard
VCR or other equipment to the video terminals of the TV.
INPUT-I
and 2 audio input
Connect the audio output from aVCR or other equipment to the
TV.
INPUT-3,
S-Video, Video and
DVD component
video and
audio input
Connect the S-Video or Video the same way as for INPUT-I and 2.
Or, connect the component
video (Y, Cr, Cb) and audio signals from
a DVD player or other equipment with component
video outputs to
the TV. If you connect the three component
video terminals (DVD
VIDEO) and you wish to use the TV's built in speakers, use the
adjacent INPUT-3 audio inputs for your audio connection.
(For
signal compatibility
information, see Appendix 3)
If you connect the component
video cables you cannot use the S-
Video orVideo
for INPUT-3.
Antenna
(ANT-A,
LOOP-OUT,
ANT-B)
LOOP
ANTRA
OUT
ANT÷B
@@@
ANT-A and ANT-B receive signals from VHF/UHF antennas or a
cable system. LOOP OUT sends the ANT-A signal out to another
component
(such as a cable box orVCR).
HDTV
interface
Connect a HDTV receiver to receive digital broadcast signals. The
15 pin HDTV CONTROL
connection
is used with the optional
Mitsubishi HD- 1080 receiver.
Some HDTV receivers do not use the H andV terminals.
Check
your HDTV receiver Owner's Guide for correct connections.
71
Advertisement
