Advertisement
Connection
of TV and Cable to HDTV
Receiver
Industry Standards for HDTV RGB signals systems, synchronizations
and signal strengths have not
been established. These inputs will not be compatible with all HDTV receivers that offer RGB. If
your HDTV receiver offers both a HDTV component
(Y, Pr, Pb) video system and a HDTV RGB
video signals, Mitsubishi suggests you use the HDTV component
video system.
IMPORTANT
If a HD-1080
receiver
was connected
and you change to
another
DTV
receiver,
you must
turn the Power off, then
unplug and plug in the television
to allow the new HD
receiver
to work correctly.
Connection
of TV and Cable to HDTV
Receiver
with
Component
Video Connections
I. Connect the outside antenna to ANT on the
optional HDTV receiver.
2. Connect the incoming cable to ANT-A on
the television back panel.
3. Connect the RCA type cables or the fitted
RCA/BNC
cables toY, Pr and Pb on the
HDTV receiver.
4. Connect the RCA type cables or the fitted
RCA/BNC
cables toY, Pr, and Pb on theTV
back panel. You must also select the DTV
Assign Input setting (page 35) of YPrPb.
5. OPTIONAL:
To useTV speakers, connect the
L(left) and R(right) audio cables to the op-
tional HDTV receiver and to HDTVAUDIO
on the television back panel.
IMPORTANT
I. SeeAppendix
4 for video signal
compatibility
information.
2. For Digital Audio connections,
see the Owner's
Guides of your
HDTV
receiver
and AV receiver.
if.......
...........
16
Advertisement
