Advertisement
TheMitsubishi Home TheaterIRSystem Control
is a special feature that makes it easier to use
your television with a Mitsubishi digital AV receiver. Once your equipment is properly connected
and set up, your TV and Mitsubishi digital AV receiver will change inputs together, to match high
resolution pictures with the proper surround sound.
When you change inputs on your TV to watch different video products, your TV will send signals
via the infrared emitter to your Mitsubishi digital AV receiver and will also change inputs to hear
the sound from that product. You will automatically hear the high quality digital surround sound
from digital products like your HDTV receiver and DVD and high quality analog stereo or sur-
round sound from non-digital products like yourVCR.
Special setups: A/V equipment:
VCR connections from pages 10 or I I,AudioVideo
Connections.
Do not connect these cable
to the TV, instead connect these to the digital AV receiver to the inputs labeled:
VCR I on digital AV receivers model M-VR800 or M-VRI000
VCR on digital AV receivers model M-VR700 or M-VR900
DVD with component
video cables from page 14. Connect the video cables as shown, except,
do not connect the audio cables to the TV. Instead, connect the digital output connection on
the DVD player to the digital input on the back of the digital AV receiver, for example to
DIGITAL INPUT I. If your DVD player does not have component
video cables, then use a S-
video cable, do not use a regular yellow video cable.
HDTV
receiver from pages 15-17. Connect the video cables as shown, except, do not connect
the audio cables to the TV. Instead, connect the digital output connection
on the HDTV re-
ceiver to the digital input on the back of the digital AV receiver, for example to DIGITAL
INPUT-2.
AV Receiver
from page 13. Connect as shown (use a S-video cable in step I if yourVCR
is a
S-video VCR). Make sure to connect the TV outputs to the AV receivers input marked TV.
AUTO STAND BY:
ON (see the owner' guide of the AV receiver for this procedure).
DIGITAL INPUTASSIGNMENT
FOR DVD:
Assign the digital input you used for your DVD player to theAV receiver's
DVD input selector. For example, if you connected your DVD player's digital
output to the DIGITAL INPUT I, you need to then assign DIGITAL INPUT I
to the AV receiver's
DVD input, so that it will automatically
be used. This
procedure
is explained in the owner's guide for theAV receiver.
DIGITALASSIGNMENT
FOR HDTV:
For Mitsubishi AV receiver model M-VR800 or M-VRI000, assign the HDTV
ditial input toVCR 2. VCR 2 will now be used to hear the HDTV sound.
If you have a Mitsubishi AV receiver model M-VR700 or M-VR900, assign the
HDTV digital input to CABLE/DBS, which will be used to hear HDTV sound.
Infrared
Emitter
from page 13, Connect as shown.
66
Advertisement
