Advertisement
Connection of TV to DVD with Component
Video Outputs
I. Connect the ComponentVideo
cables from
VIDEO OUT on the back of the DVD player
to DVDVIDEO
input on theTV back panel,
matching the correct components:
• YtoY,
• Cr to Cr,
• Cb to Cb,
2. Connect a set of audio cables from AUDIO
OUT on the back of the DVD player to
AUDIO, INPUT-3 on theTV back panel. The
red cable connects to the R (right) channel
and the white cable connects to the L (left)
channel.
IMPORTANT
h SeeAppendix
4 for component
video signal compatibility
information.
2. For DigitalAudio
connections,
see the Owner's Guides of your
DVD Player and AV receiver.
Warning:
Don't display the same stationary images on the screen for more than 15%of your total TV viewing in
one week. Examplesof stationary images are letterbox top/bottom bars from DVD disc or other video sources, side
bars when showing standard TV pictures on widescreen TV's,stock market reports, video game patterns, station Iogos,
web sites or stationary computer images. Such patterns can unevenly age the picture tubes causing permanent
damageto the T_. Pleasesee page 74 for a detailed explanation.
14
Advertisement
