Table of Contents
Advertisement
Fluidmesh 1200 VOLO
Figure 39. Advanced Tools window (Bandwidth test tool)
3.
Click the Run button to the right of the IP address field.
• The bandwidth test result will be shown below the test
Using the Path MTU discovery tool
The Path MTU discovery tool tests the size of the maximum transmission
unit (in other words, the largest protocol data unit that can be
communicated in a single network layer transaction).
To use the Path MTU discovery tool, do the following steps:
1.
Determine what wireless link is to be tested between the
Fluidmesh unit and another unit in the wireless network. Get the
IP address of the other unit.
2.
Enter the IP address of the second unit in the Path MTU
discovery field
© 2020 Cisco and/or its affiliates. All rights reserved.
controls.
(Figure 40 (page
85)).
Page 84 of 169
Advertisement
Table of Contents
