Switching Between Offline And Online Modes - Cisco Fluidmesh 1200 VOLO Installation And Configuration Manual

Fluidmesh 1200 VOLO

7.3. Switching between offline and online modes

The Configurator interface may not be in the needed mode when you log
in. To switch between Offline and Online modes, do the steps that follow:
1. Log in to the Configurator interface as shown in
the Fluidmesh 1200 VOLO for device configuration" (page
• The Configurator landing page will be shown
© 2020 Cisco and/or its affiliates. All rights reserved.
(page 56)).
"Accessing
46).
(Figure 21
Page 55 of 169