Plug-In Management Procedures; Plug-In Activation - Cisco Fluidmesh 1200 VOLO Installation And Configuration Manual

Fluidmesh 1200 VOLO
Plugin
Fluidmesh
Access
Points
VLAN
Virtual
Gigabit
L2TP
PROFINET
QNET
FIPS
TITAN
UNII2
To purchase any of the software plug-ins, please contact your Fluidmesh
Networks representative.

8.2. Plug-in management procedures

8.2.1. Plug-in activation

The Plug-in management procedure has been standardized, and is the
same for all Fluidmesh hardware devices.
To obtain a plug-in activation code for a Fluidmesh device, do the
following steps:
1. Contact your Fluidmesh Networks representative to purchase a
generic 16-digit License code for plug-in activation.
2. Quote the unique mesh unit identification number (5.a.b.c) of the
Fluidmesh hardware device.
3. Using the Fluidmesh Partner Portal, associate the License code
with the quoted Fluidmesh device to get an Activation code.
4. Enter the Activation code on the MANAGE PLUG-INS window for
the unit.
You can also deactivate a plug-in Activation code that is currently in use
so it can be used with a different Fluidmesh unit. To deactivate an active
plug-in, refer to
To convert a License code into an Activation code for a Fluidmesh device,
do the following steps:
1. Log on to the
2. Click the Plug-ins link.
© 2020 Cisco and/or its affiliates. All rights reserved.
FM 3200 FM 3500
BASE ENDO
FM 3200
ENDO
Available Not
available
Available Available
Not Not
available available
Available Available
Available Available
Available Available
Available Available
Available Available
Available Available
The PLUGINS sub-tab.
Fluidmesh Partner
FM 4200 FM 4500
FIBER FIBER
FM 4200 FM 4500
MOBI MOBI
Available Not
available
Available Available
Not Not
available available
Available Available
Available Available
Available Available
Available Available
Available Available
Available Available
Portal.
Page 139 of 169
FM 4800
Not
available
Available
Not
available
Available
Available
Available
Available
Available
Available