Table of Contents
Advertisement
Fluidmesh 1200 VOLO
Unit series
FM 3500
ENDO
FM 4500-
series
FM 4800
Table 2. Power consumption figures (gateway units)
Unit
Maximum power consumption (realistic system-design assumption)
FM 1000
60 Watts
3.2. Fluidmesh Architecture
3.2.1. Overview
Wireless network architectures
Depending on the network design and the type of components used, the
Fluidmesh 1200 VOLO can be used to create wireless network
architectures, including:
• Point-to-point (P2P) links.
• Point-to-multipoint (PTMP) sectors.
• Mesh networks.
• Mobility networks.
• Mixed networks that are capable of using any combination of types
listed above.
The FluidMAX TDMA protocol
Individual radio transceivers can easily be assigned different roles within
the same network, using Fluidmesh's patented FluidMAX™ technology. A
typical example of a general network architecture that uses a combination
of Fluidmesh components is shown below:
© 2020 Cisco and/or its affiliates. All rights reserved.
Minimum power
consumption
consumption (typical
8 Watts
10 to 12 Watts
8 Watts
10 to 12 Watts
13 Watts
15 to 17 Watts
Nominal power
Maximum power
conditions)
(realistic system-
15 Watts
15 Watts
20 Watts
consumption
design
assumption)
Page 13 of 169
Advertisement
Table of Contents
