Using The Path Mtu Discovery Tool - Cisco FLUIDMESH FM3200 Endo Installation And Configuration Manual

Backhaul FM3200 Endo Cisco Ultra-Reliable Wireless
Figure 29. Advanced Tools window (Bandwidth test tool)
3. Click the Run button to the right of the IP address field.
• The bandwidth test result will be shown below the test

Using the Path MTU discovery tool

The Path MTU discovery tool tests the size of the maximum transmission
unit (in other words, the largest protocol data unit that can be
communicated in a single network layer transaction).
To use the Path MTU discovery tool, do the following steps:
1. Determine what wireless link is to be tested between the
Fluidmesh unit and another unit in the wireless network. Get the
IP address of the other unit.
2. Enter the IP address of the second unit in the Path MTU
discovery field
© 2020 Cisco and/or its affiliates. All rights reserved.
controls.
(Figure 30 (page 88)).
Page 87 of 177