Table of Contents
Advertisement
Dedicated Searches
Dedicated Signal Stalker II
Dedicated STLK mode lets you access and run
Signal Stalker II easily and quickly.
In Manual, Program or Scan mode, press FUNC
SCAN to access the Signal Stalker II dedicated
mode.
Note: When a signal is being received, the
softkey (F1) changes to
the
softkey by pressing FUNC F1 when the
Band
F1 key function is
Operation of the dedicated Signal Stalker II
mode is almost identical to that of the object
mode, with one exception. When dedicated
Signal Stalker II mode is used, you may press
the numeric key on the keypad that corresponds
with the sub-band you wish to enable or disable.
Disabling a sub-band will cause the Signal Stalker
II system to skip the frequencies within that sub-
band as it performs its sweeps.
Signal Stalker II sub-bands:
Freq. (MHz)
0
25-54 MHz
1
108-137
2
137-174 MHz
3
216-300
4
300-406
5
406-470
6
470-512
7
764-797
8
806-869
9
894-1300 MHz
. You can access
FrL/O
FrL/O.
Band
VHF Low Band
VHF Aircraft Band
VHF High Band
220 MHz Commercial/
Amateur Band
UHF Military Air Band
UHF Band
UHF-T Band
700 MHz Band
800 MHz Band
900 MHz Band, 23 cm
Amateur Band
64
Pub
Band
Ded
Your
you
and
sear
1.
Advertisement
Table of Contents
