Cloning Your Scanner; Delay - Radio Shack Racing Scanner User Manual

Cloning Your Scanner

You can transfer your scanner's data to and from another PRO-444
scanner using a connecting cable with
on both ends (not supplied).
1. Turn on both scanners.
2. Connect the cable to each scanner's PC/IF/PHONE jack.
3. Press EDIT on both scanners.
4. Use the SEL/VOL dial to select
5. Choose
RECEIVE
press ENT twice.
6. Choose
SEND
7. Press ENT twice on the scanner you
are transferring from to send the data.
appears on the display.
START!!
8. When
FINISH!!
the cable and press EDIT to go back to
the menu.
n
Note:
ERROR!! Erasing DATA!!
if the scanner cable is removed during data transfer. To cancel the
error, press CLR or EDIT. The target scanner resets to factory default
settings. Retry cloning the

Delay

Two-way radio systems often have a period of several seconds
between a original and reply transmissions. To avoid missing a
transmission while in scanning mode, you can program a two-second
delay into any channel.
1. While monitoring a car channel, press FUNC then DELAY.
2. When your scanner stops on
a car number channel with a
programmed delay,
the scanner continues to monitor
on the scanner you are transferring to, then
on the scanner you are transferring from.
replaces
START!!
data.
appears and
D
16
/ -inch (3.5mm) stereo plugs
1
8
, then press ENT.
CLONE
CLONE RECEIVE
START!!
, remove
CLONE RECEIVE
FINISH!!
appears
Grand Am
26
D Lo
Gotham Comp
456.72500