Table of Contents
Advertisement
TGRP
Options
Parameter
Delay Time
1-250 x
100 ms
AudioBoost
On or Off
Hit Count
Numeric
value
TSYS Menu
The TSYS menu is used when creating new
Trunking System objects, or editing existing
Trunking System objects.
TSYS
Options
Parameter
Type
MOT
800/900,
MOT
VHF/UHF,
P25
MANUAL,
P25
AUTO,
EDACS
STD,
EDACS
NAROW,
LTR
Menu Reference
Description
Sets the amount of time (in 100
millisecond intervals) for the
wait for reply delay if Delay is
On, e.g., 20=2 seconds.
Applies a 6 dB boost to audio
levels when the object is active.
Increments each time a trans-
mission is received on the
TGRP object. Global "Hit
Counts" must be set to ON.
Press the
softkey to reset
Dflt
to 0.
Description
Sets the trunking system type.
Choose MOT 800/900 if the
system is a Motorola 800 or 900
MHz analog or digital trunked
radio system that uses the 3600
baud control channel. Use
P25 AUTO for most Project
25 systems that send channel
table information over the sys-
tem control channel. Use P25
MANUAL if it is necessary to
manually set the channel table
information or if you wish to use
the default 800 MHz table data.
Use EDACS STD for most 800
MHz EDACS systems using the
9600 BPS EDACS control chan-
nel. Use EDACS NAROW for
most 900 MHz and some VHF/
UHF EDACS systems using the
4800 BPS EDACS control chan-
nel. Use LTR for Logic Trunked
Radio (LTR) systems.
113
Advertisement
Table of Contents
