Trunked Mode
Motorola 3600
baud control
channel
P25 9600 BPS
control channel
EDACS control
channel
LTR home
repeater
Motorola
analog voice
channel
Tune LED
Tune LED can provide visual indication of signal
strength using the tri-color LED.
To activate the Tune LED:
1. Press PGM for Program Mode.
2. Press
GLOB
3. Press q to select
4. Press t or u to select Tune LED
5. Press the
SAVE
to the radio's configuration memory.
Dedicated Searches
Analysis Display
qq% SID:ssss Stt
qq = decoding quality of the control
channel data, SID = System ID, and
S = Site Number
qq% Nnnn W:wwwww
Sys:sss Rrr Stt
qq = decoding quality of the control
channel data, N = NAC, W = WACN, SYS =
System ID, R = RFSS, and S = Site Number
qq% S:ss h/H s/S a/A
qq = decoding quality of the control
channel data, S = Site ID, h/H = not home
site/is home site, s/S = not SCAT site/is
SCAT site, a/A = not Aux CC/is Aux CC
–
–
HR:hh
A
HH
GGG
HR = the home repeater number of the
tuned frequency, A-HH-GGG = the Area,
Home Repeater and Group ID of the LTR
talkgroup
–
VC: lsTGID
nnnnn
lsTGID = the decoded talkgroup ID data
from the lowspeed data stream
Note that the analog lowspeed data
protocol does not provide error
correction, and some false "VC: lsTGID"
readings should be expected.
softkey.
Tune LED:.
softkey to save your changes
67
or
.
on
off