Table of Contents
Advertisement
Quick Links
Instructions for Use
Color LCD Monitor
Important
Please read this "Instructions for Use", and "Installation Manual"
(separate volume) carefully to familiarize yourself with safe and
effective usage.
Please retain this manual for future reference.
• For monitor adjustment and settings, refer to the "Installation
Manual".
• For the latest product information including the "Instructions for
Use", refer to our web site :
www.eizoglobal.com
Advertisement
Table of Contents
Related Manuals for Eizo RadiForce RX1270
Summary of Contents for Eizo RadiForce RX1270
- Page 1 Instructions for Use Color LCD Monitor Important Please read this “Instructions for Use”, and “Installation Manual” (separate volume) carefully to familiarize yourself with safe and effective usage. Please retain this manual for future reference. • For monitor adjustment and settings, refer to the “Installation Manual”.
- Page 2 EIZO Corporation is under no obligation to hold any submitted material or information confidential unless prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO monitor specifications are subject to change without notice.
-
Page 3: Precautions
PRECAUTIONS IMPORTANT • This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. • To personal safety and proper maintenance, please read carefully this section and the caution statements on the monitor. - Page 4 A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the unit falls, disconnect the power immediately and ask your local EIZO representative for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock.
- Page 5 If the unit falls, please ask your local EIZO representative for advice. Do not continue using a damaged unit. Using a damaged unit may result in fire or electric shock. When reattaching the tilt stand, please use the same screws and tighten them securely.
- Page 6 CAUTION Never look directly at the light source of the backlight or spotlight. Doing so could cause pain in your eyes or result in impairing your eyesight. Do not apply excessive force to the arm of the spotlight. Forcibly bending or twisting the arm may result in equipment damage or failure. Handle with care when carrying the unit.
-
Page 7: Notice For This Monitor
When the screen becomes dark or begins to flicker, please contact your local EIZO representative. • The screen may have defective pixels or a small number of light dots on the screen. This is due to the characteristics of the panel itself, and is not a malfunction of the product. -
Page 8: To Use The Monitor For A Long Time
• To adjust measurement results of the integrated calibration sensor (Integrated Front Sensor) to those of an EIZO external sensor (UX1 or UX2 sensor) that is sold separately, perform correlation between the Integrated Front Sensor and the external sensor using RadiCS / RadiCS LE. Periodical correlation allows you to maintain the measurement accuracy of the Integrated Front Sensor at a level equivalent to that of the external sensor. -
Page 9: Table Of Contents
CONTENTS ............. 9 Chapter 1 Introduction ........10 1-1. Features ............10 1-2. Package Contents ........13 ● EIZO LCD Utility Disk ........13 1-3. Controls and Functions ......15 Chapter 2 Installation / Connection ....16 2-1. Before Installing the Product .....16 ●... -
Page 10: Chapter 1 Introduction
Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features ● Displaying high-quality and high-resolution images 4200 x 2800: Images are displayed with a single DisplayPort cable only. (DisplayPort Version1.4) ● Hybrid monochrome and color display... - Page 11 ● Lighting function (RadiLight) is available RadiLight Area (backlight): RadiLight Area is the built-in backlight function of the monitor. This light illuminates the room indirectly from the back of the monitor, allowing users to interpret images effectively even in a dark place. RadiLight Focus (spotlight): RadiLight Focus is the removable spotlight.
- Page 12 ● Monitor operation from the mouse and keyboard Using the RadiCS / RadiCS LE monitor quality control software, you can perform the following monitor operations with a mouse and a keyboard. • Switching CAL Switch modes • Switching input signals •...
-
Page 13: Package Contents
1-2. Package Contents Check that all of the following items are contained in the package. If any of these are missing or damaged, contact your dealer or local EIZO representative listed on the attached sheet. Note • It is recommended that the box and packing materials be stored so that they can be used to move or transport this product. - Page 14 To use RadiCS LE For information on how to install and use RadiCS LE, refer to RadiCS LE User's Manual (on the CD-ROM). When using RadiCS LE, connect the monitor to your PC using the supplied USB cable. For more information about how to connect the monitor, see “2-2.
-
Page 15: Controls And Functions
1-3. Controls and Functions Approx. 30° 1. Integrated Front Sensor This sensor is used to perform calibration and Grayscale Check. (Movable) 2. Ambient Light Sensor This sensor measures environmental illumination. Environmental illuminance measurement is performed using the RadiCS / RadiCS LE quality control software. 3. -
Page 16: Chapter 2 Installation / Connection
Chapter 2 Installation / Connection 2-1. Before Installing the Product Carefully read “PRECAUTIONS” (page 3) and always follow the instructions. If you place this product on a lacquer-coated desk, the color may adhere to the bottom of the stand due to the composition of the rubber. - Page 17 PbyP (dual-screen) display Attention • When using the monitor for PbyP display, you need to configure "Input" in the Setting menu to select a combination of signals to be displayed. For details, refer to the Installation Manual (on the CD-ROM). •...
-
Page 18: Attaching And Removing Radilight Focus (Spotlight)
Plug the power cord into a power outlet and the power connector on the monitor. Insert the power cord fully into the monitor. Connect the USB cable to the monitor’s USB upstream port and to the computer’s downstream port respectively. The cable connection is required when you use RadiCS / RadiCS LE or when you connect a USB device (USB-connected peripheral device) to the monitor. -
Page 19: Turning On The Power
2-4. Turning On the Power Touch to turn on the power to the monitor. The power switch indicator of the monitor lights up green. If the indicator does not light up, see “Chapter 3 No-Picture Problem” (page 22). Note • When you touch any of the buttons excluding with the monitor power turned off, starts flashing to let you know where the power switch is located. -
Page 20: Installing The Cable Cover
2-6. Installing the Cable Cover Tidy the cables into the cable holder. Install the cable cover. Example: Installing the Cable Cover (Right) Attention • Install the cover properly to ensure ventilation inside the monitor. Note • To remove the cable cover, pull it toward you. Chapter 2 Installation / Connection... -
Page 21: Using Radilight Area / Radilight Focus
2-7. Using RadiLight Area / RadiLight Focus Check to see if the monitor and the computer are powered on. The operation switches turn RadiLight Area and RadiLight Focus on/off. Adjusts the brightness of RadiLight Area. RadiLight Focus on/off RadiLight Area Brightness up/down, on/off Attention •... -
Page 22: Chapter 3 No-Picture Problem
Manual (on the CD-ROM). • Turn off the main power, and then turn it on again. • Power switch indicator blinks: Orange, • Connect via the signal cable specified by EIZO. Turn off the Green main power, and then turn it on again. -
Page 23: Chapter 4 Specifications
Chapter 4 Specifications 4-1. Specifications List Type RX1270: Anti-Glare RX1270-AR: Anti-Reflection LCD Panel Type Color (IPS) Backlight Size 78.4 cm (30.9 inch) Resolution (H x V) 4200 × 2800 Display Size (H x V) 652.7 mm × 435.1 mm Pixel Pitch 0.1554 mm Display Colors 10-bit color (DisplayPort): Up to 1073.74 million colors (from a... -
Page 24: Compatible Resolutions
Transportation Temperature -20 ˚C - 60 ˚C (-4 ˚F - 140 ˚F) / Storage Humidity 10 % - 90 % R.H. (no condensation) Environmental Air Pressure 200 hPa - 1060 hPa Requirements *1 During PinP sub-window display *2 The vertical scan frequency supported varies according to the resolution. For more information, refer to “4-2. Compatible Resolutions”... -
Page 25: Optional Accessories
4-3. Optional Accessories The following accessories are available separately. For the latest information about the optional accessories and information about the latest compatible graphics board, refer to our web site. www.eizoglobal.com Calibration Kit RadiCS UX2 Ver.5.0.4 or later RadiCS Version Up Kit Ver.5.0.4 or later Network QC Management Software RadiNET Pro Ver.5.0.4 or later Cleaning Kit... -
Page 26: Appendix
Appendix Medical Standard • It shall be assured that the final system is in compliance to IEC60601-1-1 requirement. • Power supplied equipment can emit electromagnetic waves, that could influence, limit or result in malfunction of the monitor. Install the equipment in a controlled environment, where such effects are avoided. -
Page 27: Emc Information
Be sure to use the cables attached to the product, or cables specified by EIZO. Use of cables other than those specified or provided by EIZO of this equipment could result in increased electromagnetic emissions or decreased electromagnetic immunity of this equipment and improper operation. - Page 28 Technical Descriptions Electromagnetic emissions The RadiForce series is intended for use in the electromagnetic environment specified below. The customer or the user of the RadiForce series should assure that it is used in such an environment. Emission test Compliance Electromagnetic environment - Guidance RF emissions Group 1 The RadiForce series uses RF energy only for its internal function.
- Page 29 Electromagnetic immunity The RadiForce series has been tested at the following compliance levels according to the testing requirements for professional healthcare facility environments defined in IEC / EN60601-1-2. Customers and users of the RadiForce series must ensure that the RadiForce series is used in the following environments: Immunity test Test level for...
- Page 30 Recommended separation distances between portable or mobile RF communication equipment and the RadiForce Series The RadiForce series is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the RadiForce series can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the RadiForce series.
- Page 31 The RadiForce series is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. For other portable and mobile RF communication equipments (transmitters), minimum distance between portable and mobile RF communications equipment (transmitters) and the RadiForce series as recommended below, according to the maximum output power of the communications equipment.
-
Page 32: Information For Radio Interference
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord... - Page 33 153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan 中国苏州市苏州工业园区展业路 8 号中新科技工业坊 5B Carl-Benz-Straße 3, 76761 Rülzheim, Germany 00N0N165B1 www.eizoglobal.com IFU-RX1270-6 Copyright © 2020 EIZO Corporation. All rights reserved. 2nd Edition - May 7th, 2020 Printed in Japan.