Table of Contents
Advertisement
Re-recording a Picture in the Middle of a Recorded Tape—Iinsert Is {rete
cel tare}
You can insert a scene in the middle of a recorded tape by setting the starting and ending points. The previous
recorded portion will be erased. If the[[{@Jindicator is displayed in the viewfinder, press COUNTER/TIME CODE
to erase it and display the tape counter. (1) Press START/STOP to set the camcorder to recording standby
mode. (2) Keep pressing the + (forward playback) or — (reverse playback) side of EDITSEARCH, and release
the button where you want to end the insertion. The camcorder enters standby mode again. (3) Press
COUNTER RESET. The counter resets to zero. (4) Keep pressing the - side of EDITSEARCH and release the
button at the point where you want to start the insertion. (5) Press ZERO MEM. The ZERO MEM indicator
flashes and the ending point is stored in memory. (6) Press START/STOP. Insert recording begins. The insert
recording stops automatically at the counter zero point.
COUNTER RESET
5
ZERO MEM
STANDBY
LOCK
START/
STOP
To Change the End Point
Press ZERO MEM to erase the ZERO MEM indicator, then repeat steps 2 to 5.
Note
The picture may be distorted at the end of the inserted portion when it is played back.
71
aiMd1g
& Bulpsooel-oy
Advertisement
Table of Contents
