Table of Contents
Advertisement
You can monitor the playback picture in the viewfinder. You can also monitor on the TV screen, after
connecting the camcorder to the TV/VCR (p.23). You can control playback using the supplied Remote
Commander (p.86). Before using the Commander, press REMOTE COMMANDER on the camcorder lightly so
that the remote sensor pops up. Then slide the HOLD switch in the direction opposite the arrow. Be sure that
the OUT/IN selector on the camcorder is set to OUT. (1) While pressing the small green button on the POWER
switch, slide it to VTR. (2) Insert the recorded tape with the window facing out. (3) Open the lid to the control
panel. (4) Press >. Playback starts.
i t FRAME
ff
SLOW
(e)
REWQ]-——
———- © FF
PAUSE
eREC_»
UD
WeAUSE
Bestow
xX 2
CJ
Co
oO
To stop playback, press 7.
To rewind the tape, press <4.
To advance the tape rapidly, press PP.
To display the viewfinder screen indicators on the TV
Press DISPLAY on the Remote Commander.
To remove the displayed indicators, press DISPLAY again.
To select the monitor sound
Change the "HiFi SOUND" mode setting in the menu system (p.75).
Advertisement
Table of Contents
