Removal And Replacement Procedures For Authorized Service Provider Parts; Component Replacement Procedures; Bottom Cover - HP ZBook Studio G5 Maintenance And Service Manual

5 Removal and replacement procedures for
authorized service provider parts
CAUTION: Components described in this chapter should be accessed only by an authorized service provider.
Users who access these parts can damage the computer or void the warranty.

Component replacement procedures

There are as many as 82 screws that must be removed, replaced, and/or loosened when servicing the parts
described in this chapter. Make special note of each screw size and location during removal and replacement.

Bottom cover

Description
Bottom cover
Before removing the bottom cover, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
Remove the bottom cover:
1. Loosen the 9 captive Torx screws (1) that secure the bottom cover to the computer.
Spare part number
L28666-001
Component replacement procedures 33