Bottom Speakers - HP ZBook Studio G5 Maintenance And Service Manual

Bottom speakers

Description
Bottom speakers (includes cable)
Before removing the bottom speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the hard drive (for left speaker) (see
Remove the speakers:
Left speaker
1. Disconnect the speaker cable from the system board (1).
2. Remove the speaker cable from the clips (2).
3. Remove the two Phillips M2.0×2.0 screws (3) that secure the speaker to the computer.
4. Remove the speaker (4).
Right speaker
1. Disconnect the speaker cable from the system board (1).
2. Remove the speaker cable from the clips (2).
3. Remove the two Phillips M2.0×2.0 screws (3) that secure the speaker to the computer.
Bottom cover on page
Battery on page 35).
Hard drive/solid-state drive (2.5 inch) on page
33).
Component replacement procedures
Spare part number
L28672-001 (Speaker Kit)
42).
53