Removal And Replacement Procedures; Preparing To Disassemble The Computer - HP Pro ms218 Maintenance And Service Manual

3

Removal and Replacement Procedures

The following sections provide information about disassembling various components of the HP Pro
All-in-One.

Preparing to disassemble the computer

To avoid injury and equipment damage, always complete the following steps in order, when opening
the HP Pro All-in-One.
1.
2.
3.
4.
5.
WARNING!
Downloaded from www.Manualslib.com
Remove all media (CD, DVD, etc.) from the computer.
Shut down the computer.
After the system has completely shut down, disconnect the power adapter from the back of the
HP Pro All-in-One.
Disconnect all other attached cables from the back of the computer.
Place the computer face down on a soft flat surface. HP recommends that you set down a
blanket, towel, or other soft cloth to protect the touch screen surface from scratches or other
damage.
Beware of sharp edges inside the chassis.
manuals search engine
Preparing to disassemble the computer 5