Time Settings; System Time - Planet GS-4210-8UP2S User Manual

4.2.2 Time Settings

4.2.2.1 System Time

Configure SNTP on this page. SNTP is an acronym for Simple Network Time Protocol, a network protocol for synchronizing
the clocks of computer systems. You can specify SNTP Servers and set GMT Time zone. The SNTP Configuration screens in
Figure 4-2-8 & Figure 4-2-9
The page includes the following fields:
Object
 Enable SNTP
 Manual Time
 Time Zone
 Daylight Saving Time
User's Manual of GS-4210-8UP2S/GS-4210-16UP4C/GS-4210-24UP4C
appear.
Figure 4-2-8 SNTP Setup Page Screenshot
Description
Enabled: Enable SNTP mode operation.
When enabling SNTP mode operation, the agent forwards and transfers
SNTP messages between the clients and the server when they are not
on the same subnet domain.
Disabled: Disable SNTP mode operation.
To set time manually.
 Year - Select the starting year.
 Month - Select the starting month.
 Day - Select the starting day.
 Hours - Select the starting hour.
 Minutes - Select the starting minute.
 Seconds - Select the starting seconds.
Allows to select the time zone according to the current location of switch.
This is used to set the clock forward or backward according to the configurations
set below for a defined Daylight Saving Time duration. Select 'Disable' to disable
the Daylight Saving Time configuration. Select 'Recurring' and configure the
62