Ipv6 Command; Jumbo-Frame Command; Lacp Command; Lag Command - Planet GS-4210-8UP2S User Manual

6.3.16 ipv6 Command

Description:
IPV6 configuration
Syntax:
ipv6
acl This command creates an ACL, which perform classification onlayer 3 fields and enters to ipv6-access configuration mode.
address Set IPv6 address and prefix
autoconfig Enable Ipv6 auto-configuration
default-gateway Set IPv6 gateway
dhcp Set IPv6 DHCP Client
mld MLD Configuration

6.3.17 jumbo-frame Command

Description:
Jumbo Frame configuration
Syntax:
jumbo-frame <64-9216> (Maximum frame size)

6.3.18 lacp Command

Description:
LACP Configuration
Syntax:
lacp system-priority <1-65535> (LACP system priority)

6.3.19 lag Command

Description:
Link Aggregation Group Configuration
Syntax:
lag load-balance src-dst-mac/src-dst-mac-ip

6.3.20 line Command

Description:
To identify a specific line for configuration
Syntax:
line console/ssh/telnet
User's Manual of GS-4210-8UP2S/GS-4210-16UP4C/GS-4210-24UP4C
368