4.5.7.1 Port Settings
IP Source Guard is a secure feature used to restrict IP traffic on DHCP snooping untrusted ports by filtering traffic based on
the DHCP Snooping Table or manually configured IP Source Bindings. It helps prevent IP spoofing attacks when a host tries to
spoof and use the IP address of another host.
The IP Source Guard Port Setting and Information screens in
The page includes the following fields:
Object
Port
Status
Verify Source
Max Binding Entry
Buttons
: Click to apply changes.
User's Manual of GS-4210-8UP2S/GS-4210-16UP4C/GS-4210-24UP4C
Figure 4-5-60 IP Source Guard Port Setting Page Screenshot
Description
Select port for this drop down list.
Enable or disable the IP source guard.
Configures the switch to filter inbound traffic based IP address, or IP address and
MAC address.
None Disables IP source guard filtering on the Managed Switch.
IP Enables traffic filtering based on IP addresses stored in the binding
table.
IP and MAC Enables traffic filtering based on IP addresses and
corresponding MAC addresses stored in the binding table.
The maximum number of IP source guard that can be secured on this port. The
available options are "No-Limit" and "1-50".
Figure 4-5-60
&
Figure 4-5-61
294
appear.