Programming Keypad Access; Navigating Via Keypad - TCS SuperSTAT Series Configuration Manual

Configuration

Programming Keypad Access

The keypad can be configured to restrict access to the Programming Setup and Clock and Schedule functions. You can
control the access to either function by configuring the keypad dip switches on the inside of the front cover as shown.
Keypad Dip Switch Settings
The dip switch panel controls access to clock,
schedules, and programming.
Access to
PROGRAM
SETUP and
CLOCK SETUP
(Default)
No access to
PROGRAM
SETUP and
CLOCK SETUP

Navigating Via Keypad

All settings on the SuperSTAT can be made via the keypad. Each screen will display the name of the setting, a selection
option, and current values for that screen, which will flash to indicate which is active. Pressing the WARMER button will
increase the value or advance the active setting to the next option on the screen; pressing the COOLER button will reverse
the process. For screens with multiple values (e.g., date setup), pressing the OVERRIDE button will advance you to the
next value. After adjusting the values, press the PROGRAM SETUP or CLOCK SETUP button again to save the values and
advance to the next screen.
NOTE: Press and hold the PROGRAM SETUP, CLOCK SETUP, WARMER, or COOLER buttons in order to scroll through
screens and values more quickly. Press the SERVICE STATUS button to exit PROGRAM SETUP Mode or CLOCK SETUP
Mode and return to the main screen.
Keypad Button Functions
fan
switch Press to change fan
speed and system
modes (when
enabled)
system
switch
Press to change
program
setup fan thermostat's
program or
temperature setback
times (when
clock
enabled)
setup
4
Access to
PROGRAM
SETUP only
Access to
CLOCK SETUP
only
Press to raise or
lower temperature
settings when
OCCUPIED LED is on
Press when
OCCUPIED LED is off
OVERRIDE
to restore occupied
temperature settings
Press to review
service
service screens
status
2800 Laura Lane • Middleton, WI 53562
R W/Y1 W/Y2 G Y2 G A2
+ 24V – DI1 DI2 DI3 OVR T1
Cover
(Inside)
fan
switch
system
switch
program
setup
clock
setup
| 800.288.9383 | www.tcsbasys.com
A1 A02 A01 GND
T1 T2 T2 T3 T3
ON
1 2 3 4 5
Occupied
Heating
Cooling
service
Fan
status
Service
Data/
Program
WARMER
COOLER
OVERRIDE
Keypad