Occupancy Settings - TCS SuperSTAT Series Configuration Manual

Configuration

Occupancy Settings

STEP 1 Occupied Fan Mode: Choose between ON (continuous),
COOL (gas heat or no heat), or AUTO for fan run times during
occupied periods
STEP 2 Unoccupied Fan Mode: Choose between AUTO or COOL for
fan run times during unoccupied periods.
STEP 3 Occupied Heat Setpoint A: Set the heatpoint for the occupied
period.
STEP 4 Occupied Heat Setpoint B: Set the heatpoint for the occupied
period.
STEP 5 Occupied Heat Setpoint C: Set the heatpoint for the occupied
period.
STEP 6 Occupied Heat Setpoint D: Set the heatpoint for the occupied
period.
STEP 7 Unoccupied Heat Setpoint: Set the Unoccupied Mode's
heating setpoint.
STEP 8 Occupied Cool Setpoint A: Set the cooling setpoint for this
occupied period.
STEP 9 Occupied Cool Setpoint B: Set the cooling setpoint for this
occupied period.
STEP 10 Occupied Cool Setpoint C: Set the cooling setpoint for this
occupied period.
6
2800 Laura Lane • Middleton, WI 53562
SET OCCUPIED FAN
MODE:
SET UNOCCUPIED
FAN MODE?
OCCUPIED HEAT
SETPOINT A:
OCCUPIED HEAT
SETPOINT B:
OCCUPIED HEAT
SETPOINT C:
OCCUPIED HEAT
SETPOINT D:
UNOCCUPIED HEAT
SETPOINT:
OCCUPIED COOL
SETPOINT A:
OCCUPIED COOL
SETPOINT B:
OCCUPIED COOL
SETPOINT C:
| 800.288.9383 | www.tcsbasys.com
AUTO
AUTO
70F
70F
70F
70F
60F
75F
75F
75F