Introduction; Display Screen And Keypad; Locating The Programming Keypad - TCS SuperSTAT Series Configuration Manual

Configuration

Introduction

Congratulations on choosing the SuperSTAT™ Thermostat SZ1041! The SuperSTAT series of thermostats are feature rich,
multifunction devices providing extensive controls across a wide range of HVAC applications.
Complete the configuration after installation (refer to the
mounting the device, wiring the communications network and connecting other devices to the SuperSTAT.) Your
configuration settings will be uploaded to Ubiquity Cloud the first time you make a connection to the site. Alternatively, you
can skip configuring the SuperSTAT via the keypad and perform all configurations via Ubiquity Cloud, or via a PC running
TCS Insight software, which is available for download on the
NOTE: When configuring the SuperSTAT via a connected PC, you must first set the SuperSTAT's address, baud rate, and
temperature scale using the keypad (see
If you have any questions regarding your SuperSTAT, do not hesitate to contact TCS Technical Support at 800.288.9383,
ext. 2. Our Technical Support Department hours are Monday – Friday, 7:00 a.m. to 7:00 p.m. (CST).

Display Screen and Keypad

The display screen on the right side of the cover provides at-a-glance information including day, date, time, and
temperature (based on sensor selection and wiring).

Locating the Programming Keypad

The SuperSTAT is programmed through a keypad behind the panel on the left side of the cover. Access the keypad by
swinging open the cover panel.
3 3 3
"Programming Keypad Access" on page
Cover panel (shaded)
swings open
2800 Laura Lane • Middleton, WI 53562
SuperSTAT 1041 Installation Manual
TCS website.
4).
Building Automation Solutions
Occupied
Heating
Cooling
fan service
Fan
switch status
Service
Data/
Program
WARMER
system
switch
program COOLER
setup
clock
OVERRIDE
setup
| 800.288.9383 | www.tcsbasys.com
for instructions on
TUE 07-04-23
9:00 AM 72F
TUE 07-04-23
9:00 AM 72F