Lightframe For Windows - Philips 107T60 Service Manual

94
107T6 CRT
Go to cover page
Introduction
Philips LightFrame feature enriches the experience of pictures and
video on a Philips CRT(picture tube) monitor. This highlighting is done
by boosting the brightness and sharpness on a selected region of the
monitor screen. Since high brightness and sharpness are not preferred
active in certain circumstances. So that you can control these
circumstances, a special program and icons will be installed in your
Windows operating systems.
Notes
Philips LightFrame will only work with monitors that have been built to
use this software. Earlier Philips monitors or other manufactures
monitors will not work with this special software. It is recommended that
you install this software only on a Philips monitor designed to use it.
These monitors can be identified by the LightFrame logo
on the front of the monitor. To control the LightFrame feature
in your monitor, you have to install the LightFrame
application which you will find on this CD-ROM.
This software is not designed for use with LCD flat screen monitors.
LightFrame will work with true Windows-based programs and DOS-
based programs that operate in a Windows environment. It will not
work with DOS-based programs operating only in a DOS environment.
Definitions
The following llist contains definitions for frequently used words.
Highlighted window : the selected window on which LightFrame
is active.
Highlighted area : the selected rectangle(area) on which LightFrame
is active.
Compatibility
this version of LightFrame is compatible with
Windows 95
Windows 98
Windows ME Millennium Edition
Windows NT
Windows 2000 Professional Edition
Windows XP
Language Selection
While English is the default language of LightFrame, the user Interface
can be set up to operate in Dutch, French, German, Italian, Portuguese,
Spanish, Simplified Chinese, Traditional Chinese or Korean.
Installation
1) To install LightFrame, place the CD in the CD-Driver.
2) Next, when the menu of items on the CD appears on your screen,
click on "Install LightFrame".
3) Now, follow the on-screen prompts to properly install the program.
The software checks to see if you have a compatible monitor. You
must say yes to the license agreement for the software to install.
4) After installation, LightFrame automatically loads and the icon
appears in the taskbar.
Notes
LightFrame is installed in the Start menu, under Programs. Unless
otherwise selected during installation, LightFrame is installed in
C:\Program Files\Philips\LightFrame. A shortcut is installed in the
StartUp folder and on the desktop. (If needed, LightFrame can be
operated manually from the StrartUp folder).
If LightFrame detects that your monitor is not LightFrame compatible,
an message appears on the monitor screen. See Error Message
number 1 under the heading Error Messages. If you see this message,
you can select to abort or continue the installation. However, if you
continue the installation, LightFrame will probably not work on the
monitor.

LightFrame for Windows

1. Put CD-ROM into CD-ROM Driver, bring up Fig. 1.
2. Click one of languages (for example: English)
on the screen, bring up, click LightFrame icon as Fig. 2
3. Click LightFrame,
Bring up, click Continue icon as Fig. 3
4. Double click the "setup" software, bring up,
LightFrame setup file as Fig. 4.
Fig. 1
Fig. 2
Fig. 3
<--------
Fig. 4