Isp (In System Programme) - Philips 107T60 Service Manual

2. At the submenu, type the path of EDID46
(For example, C:\107T6\EDID46.exe, as shown in Fig. 14).
C:\107T6\edid46.exe
OK
3. Click button. The main menu appears (as shown in Fig. 15).
This is for initialize alignment box.
Step 4. Connecting all cables and box as shown in Fig. 16.
PC
1
Printer
Port
To PC Video Port (D-sub)
Note: Before you connect all the cables and box, you must
execute EDID46.exe (substeps 5 to 7) firstly, otherwise, after you
connected the alignment kits, the following warning message will
appear on the screen as shown in Fig. 17.
CHECK SIGNAL CABLE
ISP (In System Program)
Fig. 14
Fig. 15
1=Power connector
2=D-SUB connector
DC Power
8-12V
~ ~
1
2
To
Monitor
To PC
Fig. 16
Fig. 17
Step 5: Upgrade the firmware
Choose all the items of the Programming commands, then click
"AUTO (Run All Selected)", the software will upgrade the firmware,
the LED will extinguish several seconds, after finished the upgrade,
the monitor will stand-up automatically. Bring up the window as
shown in Fig. 18,which means you have finished the upgrade
successfully.
Fig. 18
Click"Quit Program", quit the program.
Turn off the monitor, then press
the LED light, then press
You will find, after upgrade, the version have already changed
from the former"V32 107T6 V0.24 20040303" to the present
"V32 FAMILY V2.00 20040427".
MODEL SELECT MODEL SELECT
Factory
V32 FAMILY V2.00 20040427 V32 107T6 V0.24 20040303
Mode-------------
Indicator
Turn off the monitor to exit the factory mode.
107T6 CRT
Go to cover page
and simultaneously till
button, bring up MAIN CONTROLS.
, shown in Fig. 19.
Fig. 19
23