Scan Resume Methods; Time-Operated Scan; Carrier-Operated Scan; Selecting The Scan Resume Method - Kenwood TH-22A Instruction Manual

SCAN RESUME METHODS
When using Scan, it's necessary to decide under what
condition you want your transceiver to continue scanning
after detecting and stopping for a signal. You can
choose Time-operated Scan or Carrier-operated Scan.
The default is Time-operated Scan.
a Time-Operated Scan
Your transceiver stops scanning after detecting a
signal, remains there for approximately 5 seconds, and
then continues to scan even if the signal is still
present.
m Carrier-Operated Scan
Your transceiver stops scanning after detecting a
signal and remains on the same frequency until the
signal drops out. There is a 2 second delay between
signal drop-out and scan resumption to allow time for
any responding stations to begin transmitting.
36
SELECTING THE SCAN RESUME METHOD
1 Press [CALL]+ POWER ON to enter Menu Set-up.
2 Turn the ENC/SQL control to select Menu No. 03.
e The current Scan Resume status appears.
e¢ The default is "TO" (time-operated scan).