Selecting Frequency Step Size - Kenwood TH-22A Instruction Manual

SELECTING FREQUENCY STEP SIZE
Choosing the correct step size when operating is
essential in order to select your exact operating
frequency with the ENC/SQL control. The best step size
is the largest step that will still allow you to use the
ENC/SQL control to select all frequencies on which you
plan to operate. Using the best step size reduces the
time required to select new frequencies with the
ENC/SQL control; operating becomes easier.
Default (kHz)
Version
Canada
U.S.A.
Australia
Europe ..-
General
1 Press [VFO] to select the VFO.
2 Press [F], [T/CT].
e The current frequency step appears.
14
3 Turn the ENC/SQL control to switch between
available frequency steps.
« As you turn the ENC/SQL control clockwise or
counterclockwise, the following selections appear:
SkHz "> 10kHz ~—> 15 kHz
25 kHz —~— > 12.5 kHz ~—» 20 kHz
4 Press any key other than [LAMP] or [MONI].
Note. The step size can be set separately for the VFO, Calf
channel, and memory channels.