Erasing Memory Channels; Recalling Call Channel - Kenwood TH-22A Instruction Manual

ERASING MEMORY CHANNELS
Although it is possible to overwrite existing data in any of
the memory channels with new data, at times you may
wish to clear data from memory channels without
entering new data. It's convenient to clear channels no
longer used so you can identify channels that are free for
memorizing new frequencies.
1 Press [MR] to select Memory Recall.
2 Select the desired memory channel using the
ENC/SQL control or numeric keys.
3 Switch OFF the power.
4 Press [MR]+ POWER ON.
e The contents of the memory channel are erased
and transferred to the VFO. The VFO is selected.
24
CALL CHANNEL
The Call channel can be used to store any frequency
within your transceiver operating range that you wish to
make your main operating frequency. No matter what
mode the transceiver is in, the Call channel always can
be selected quickly. You may wish to dedicate the Call
channel on a group-wide basis as an emergency channel
only to be used for urgent communications. In this case,
Call Scan {page 38} will be useful.
m Recalling Call Channel
Press [CALL] to retrieve the contents of the Call
channel.
e If [CALL] is pressed again, the previous mode is
restored.
e The ENC/SQL control does not function while the
Call channel is selected.
The Call channel defaults are as follows:
* si (MHz)
ersion
| TH-22 | 22 TH-42
Canada
Australia
144.000 430.000
Europe
General