Ports; Smartprobe Test Port; Serial Port; Usb-A Port - Agilent Technologies WireScope 350 User Manual

Tƒrpvsvph‡v‚†
Q‚…‡†

Ports

SmartProbe test port

Serial port

.

USB-A port

USB-B port

Talkset connector (3.6 mm phone jack)

CompactFlash™ card slot
9−4
Attachment point for test probes. Interface contains high performance
signal channels for measurement functions and two-way control
interface for reading and controlling active test probes.
Allows the WireScope 350 or DualRemote 350 to connect to PCs or
printers. Connector is an 8-pin micro-DIN. Pin out:
9vÃ'ÃvÃÆ Tvthy
9US
! SY9
" BI9
# IPUÃVT@9
$ UY9
%' IPUÃVT@9
WireScope 350 only. The USB-A port allows the WireScope 350 to
connect to USB peripherals. Provides up to 100 mA @ 5 Vdc for attached
USB peripherals.
WireScope 350 and DualRemote 350. The USB-B port allows the
WireScope 350 or DualRemote 350 to connect to a PC equipped with a
USB port.
WireScope 350 and DualRemote 350. Supports two way voice
communication between WireScope DualRemote operators over cable
run under test. Accepts Agilent talkset (Part Number N2605A-137).
Provides removable non-volatile storage for test result files. Supports
any standard CompactFlash™ Flash storage card. Densities as high as
512MB are presently available. Data stored in standard format
compatible with PCMCIA-ATA specification.
97(ÃvÃÆ 97!$ÃvÃÆ
# !
! "
$ &
" !