Install Enclosure Door - Trane Tracer Concierge BMTC015ABC012000 Installation Instructions Manual

9. Replace the cover plate.
10. On a field-supplied label, record the location of the circuit breaker panel and the electrical
circuit. Attach the label to the cover plate.
Figure 11. AC wiring

Install Enclosure Door

1. Unpack the door and check for any missing or damaged parts.
2. Position the door at a 90 degree angle from the enclosure, as shown below.
Figure 12. Installing the enclosure door
3. Align the hinge pegs on the door with the hinge holes on the enclosure and gently lower
the door until it rests securely in the hinge holes.
BAS-SVN141E-EN
Step 5: Install Tracer Concierge System Panel
15