Delta CliQ II DRP024V060W1N Series Technical Data Sheet

TECHNICAL DATASHEET
CliQ II DIN Rail Power Supply
24 V 60 W 1 Phase, NEC Class 2 / DRP024V060W1N□
General Description
Delta's CliQ II DIN rail power supply series with UL 1310 and NEC Class 2 approvals offers start-of-the-art designs made to withstand
harsh industrial environments. The rugged plastic case is both shock and vibration resistant according to IEC 60068-2 and adheres to
IP20 protection level. The products can be used in general industrial applications, especially for dry indoor condition with the advantage
of lower wiring costs for a system due to its compliance with NEC Class 2 requirements. The NEC (National Electrical Code) is a North
American standard, which is regarded as a law in most North American states. The NEC describes the installation of electric conductors
and equipment within or on buildings. The Class 2 power units can operate over a wide temperature range of -25°C to +80°C (Cold Start
at -40°C). The products also feature universal AC input voltage range from 85 Vac to 264 Vac and the power will not de-rate throughout
the entire range. Another great feature is the conformal coating on the PCBA, which allows selected models to be certified to ATEX and
Class I, Div 2 for use in hazardous locations.
Model Information
CliQ II DIN Rail Power Supply
Model Number
DRP024V060W1N☐
Model Numbering
DR P
DIN Rail Power Supply
All parameters are specified at 25°C ambient and AC input unless otherwise indicated.
1
www.DeltaPSU.com (June 2021, Rev. 08)
Arrow.com.
Downloaded from
Input Voltage Range
85-264 Vac (120-375 Vdc)
024V
060W
Output Voltage Output Power
Highlights & Features
• Universal AC input voltage range
Power will not de-rate for the entire input voltage range
•
• UL 1310 safety approval
NEC Class 2 and Limited Power Source (LPS) approvals
•
Conforms to harmonic current IEC/EN 61000-3-2, Class A
•
Conformal coating on PCBAs to protect against common
•
dust and chemical pollutants
Hazardous Locations approval for ATEX and Class I, Div 2
•
(DRP024V060W1NY)
Certified according to IEC/EN/UL 62368-1
•
Safety Standards
CB Certified for worldwide use
Model Number:
Unit Weight:
Dimensions (L x W x D):
Rated Output Voltage
24 Vdc
1 N
Single Phase NEC Class 2
DRP024V060W1N☐
0.33 kg (0.73 lb)
120.6 x 32 x 119.3 mm
(4.75 x 1.26 x 4.70 inch)
Rated Output Current
2.50 A
□
Y - Plastic Case,
with Class I, Div 2 and ATEX
Z - Plastic Case,
without Class I, Div 2 and ATEX