Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Replacing the display back-cover
and antenna assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.
Procedure
1
Place the display back-cover and antenna assembly on a clean and flat
surface.
2
Adhere the display cable, logo-board cable, and camera cable to the display
back-cover and antenna assembly.
Post-requisites
1
Replace the
display
2
Replace the
display
3
Replace the
logo
4
Replace the camera.
5
Replace the
display
6
Replace the
display
7
Follow the procedure from step 2 to step 15 in
8
Replace the
memory
9
Replace the battery.
10 Replace the
computer
11 Replace the
rear-I/O
12 Replace the
solid-state
13 Follow the procedure from step 4 to step 6 in
14 Replace the
wireless
120
computer. After working inside your
hinges.
panel.
board.
bezel.
assembly.
modules.
base.
cover.
drive.
card.
After working inside your
"Replacing the system
"Replacing the hard
computer.
board".
drive".
Advertisement
Table of Contents
