Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Removing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
base
2
Follow the procedure from step 1 to step 4 in
3
Remove the
wireless
4
Remove the
solid-state
5
Remove the
rear-I/O
6
Remove the
computer
7
Remove the
memory
8
Follow the procedure from step 1 to step 21 in
9
Remove the
display
10 Remove the
display
Procedure
1
Using a plastic scribe, pry the camera module from the display back-cover
and antenna assembly.
2
Disconnect the camera cable from the camera module.
108
computer. After working inside your
cover.
card.
drive.
cover.
base.
modules.
assembly.
bezel.
After working inside your
"Removing the hard
"Removing the system
computer.
drive".
board".
Advertisement
Table of Contents
