Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.
Procedure
1
Connect the camera cable to the camera module.
2
Using the alignment posts, place the camera module on the display back-
cover and antenna assembly.
3
Adhere the camera module to the display back-cover and antenna assembly.
Post-requisites
1
Replace the
display
2
Replace the
display
3
Follow the procedure from step 2 to step 15 in
4
Replace the
memory
5
Replace the
computer
6
Replace the
rear-I/O
7
Replace the
solid-state
8
Replace the
wireless
9
Follow the procedure from step 4 to step 7 in
10 Replace the
base
110
computer. After working inside your
bezel.
assembly.
modules.
base.
cover.
drive.
card.
cover.
After working inside your
"Replacing the system
"Replacing the hard
computer.
board".
drive".
Advertisement
Table of Contents
