Table of Contents
Advertisement
2. Ensure that all the cables are disconnected from the kit. Remove the kit from the front of the computer.
See "Optical drive" on page 67.
3. To remove the slim optical drive from the kit, do the following:
a. Press the clip through the hole in the top of the kit as shown and push forward the slim optical drive.
Then, remove the slim optical drive out of the kit.
Figure 54. Removing the slim optical drive from the kit
b. Detach the bracket as shown to remove it from the slim optical drive.
Figure 55. Removing the bracket from the slim optical drive
4. To install a new slim optical drive into the kit, do the following:
82
P520c User Guide
Advertisement
Table of Contents
