Table of Contents
Advertisement
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 108.
2.5-inch storage drive
To remove or install a 2.5-inch storage drive, do the following:
1. Before removing an old 2.5-inch storage drive, safely eject the old storage drive from the operating
system first. For more information, see the Windows help system.
2. Unlock the enclosure cover with the provided key as shown. Press the notch
cover.
Figure 39. Opening the front-access storage enclosure cover
3. Press the pit on the bracket cover, and then grasp the tilted cover to pull the bracket out of the front-
access storage enclosure.
Figure 40. Removing the bracket from the front-access storage enclosure
4. To remove the 2.5-inch storage drive, do the following:
a. Flex both sides of the bracket to remove the 2.5-inch storage drive from the bracket.
Figure 41. Removing the 2.5-inch storage drive from the bracket
74
P520c User Guide
a
to open the enclosure
Advertisement
Table of Contents
