Table of Contents
Advertisement
a. Flex both sides of the bracket and align pins
new 3.5-inch storage drive.
Notes:
• Ensure that the circuit board faces downward and the connectors face toward the rear of the
bracket.
• Do not touch the circuit board on the storage drive.
Figure 37. Installing the 3.5-inch storage drive into the bracket
b. Slide the bracket with the new 3.5-inch storage drive into the front-access storage enclosure until it
snaps into position.
Figure 38. Installing the 3.5-inch storage drive into the front-access storage enclosure
c. Press the notch to secure the enclosure cover and lock the enclosure cover with the key.
What to do next:
1
on the bracket with the corresponding holes in the
.
Chapter 7
Hardware removal and installation
73
Advertisement
Table of Contents
